ElectroDynamics' On-line Store Header Section

Logo 400.jpg

ElectroDynamics is proud to distribute
Model Aviation Products' Accessories!

 

MAP_BVM_web.jpg MAP Ball Valve Mount SKU: MAP-BVM Price: 12.00

4mm and 6mm Festo® Ball Valve Mount

    • For solid mount of ball valve
    • Includes mounting hardware

Installation example:
MAP-BVM_install.jpg

Qty:
MAP_WSK_web.jpg MAP Wing Tip Skid Kit SKU: MAP-WTSK Price: 10.25

Madel Aviation Products
Wing Tip Skid Kit

Tired of wing tip strikes?

With our new skid kit you can easily replace worn out skids in seconds with no tools. It's easy-yo-install,

Instead of gluing on a skid, our system uses a receptacle that is glued in place and the skid simply plugs in. Replacement skids available.

(1 pair, Left / Right)

Qty:
MAP_WSR_web.jpg MAP Replacement Wing Tip Skids SKU: MAP-WTSR Price: 6.95

Replacement Wing Tip Skids

Tired of wing tip strikes?

Replacement skids for our new skid kit.

Easily replace worn out skids in seconds with no tools. It's easy-yo-install, simply plug into the Wing Tip Skid Receptacle that was glued in place.

(Pkg. of 4)

Qty:
MAP_AT4_web.jpg MAP 4oz. Air Trap SKU: MAP-AT4 Price: 46.50

4oz. Air Trap (Standard Flow)

Trap those pesky flameout/deadstick-causing air bubbles in your fuel system!

E-Z installation, put it in-line between your tank and your fuel pump or carburettor.  it'll prevent air bubbles from traveling to your engine causing an untimely flameout.

Qty:
MAP_AT4H_web.jpg MAP 4oz. High-Flow Air Trap SKU: MAP-AT4H Price: 48.50

4oz. Air Trap (High Flow)

Trap those pesky flameout/deadstick-causing air bubbles in your fuel system!

E-Z installation, put it in-line between your tank and your fuel pump or carburettor.  it'll prevent air bubbles from traveling to your engine causing an untimely flameout.

For larger turbine and gas engines that need a higher fuel flow rate.

The fuel line feeding the air trap must be at least 3/16" ID for optimum performance

Qty:
MAP_AT2_web.jpg MAP 2oz. Air Trap SKU: MAP-AT2 Price: 45.00

2oz. Mini Air Trap

Trap those pesky flameout/deadstick-causing air bubbles in your fuel system!

E-Z installation, put it in-line between your tank and your fuel pump or carburettor.  it'll prevent air bubbles from traveling to your engine causing an untimely flameout.

  • Small bottle for tight installations
  • Just fill and fly, like our Standard and High-Flow Air Traps
  • Standard fittings (1/8" ID)
  • Will work well on turbines up to 20 lbs of thrust
Qty:
MAP_S_TC.jpg MAP Tidy Strips for Servo Wire SKU: MAP-TSSW Price: 6.00

Clean up those servo wire installations!

Can be cut to length as required.

(Pkg. of 5)

Qty:
MAP_A_TC_web.jpg MAP Tidy Strips for Air Lines SKU: MAP-TSAL Price: 6.00

Clean up those Retract, Blrake Line  installations!

Can be cut to length as required.

(Pkg. of 5)

Qty:
MAP_4_TC_web.jpg MAP Tidy Clips for 4mm Lines SKU: MAP-TC4 Price: 6.00

Neaten up your 4mm Turbine Fuel Line installation!

  • Molded in one piece
  • Large base for superior glue joint

(Pkg. of 10)

Qty:
MAP_6_TC_web.jpg MAP Tidy Clips for 6mm or 1/4" TygonLines SKU: MAP-TC6 Price: 6.00

Neaten up your 6mm or 1/4" Tygon Fuel Line installation!

  • Molded in one piece
  • Large base for superior glue joint

(Pkg. of 8)

Qty: