The popular RDX1 is now upgraded to 100 Watts!

The RDX1 Pro is a 1-port AC/DC ultra-performance microprocessor-controlled battery charger/discharger with management features suitable for all popular chemistries.

Its sleek tower design allows easy front-loading plug-in convenience of balancing and temperature sensor (sensor not included) ports, a USB link and USB 5VDC 2.1 amps (may be used for powering smartphones) and 4mm battery sockets.

Deluxe features include a 3.2-inch easy-to-read LCD screen and Hitec's Charge Master software which allows the unparalleled ability to operate the RDX1 Pro through a computer.

This compact, 100-watt wonder brings integrated balancing, convenience and ease to all your charging operations.

Charging Specifications
(The RDX1 Pro replaces the legacy Hitec RDX1 and X1AC- New enhancements in BOLD)

• AC Input Voltage: 100-240V
• DC Input: 11-18V
• Charge Power: 100W
• Charge Current Range: 0.1 - 10.0A
• Max. Discharge Power: 10W
• Discharge Current Range: 0.1 - 2.0A
• Balancing Port Current Drain: 300mA/Cell
• NiCd/NiMH Battery Cell Count: 1-15 Cells
• LiPo/LiHV/LiFe/LiIon Cell Count: 1 - 6 Cells
• Pb Battery Voltage: 2 - 20V
• Net Weight: 470g
• Dimensions: 159 x 72.5 x 123mm

Use it at home on AC or at the field on DC!

For E-Z, No-Hassle One-Plug Balance-charging of on-board ED-Nano (A123) Rx and Ignition batteries, we recommend
ourDN-CC-XH6S-JR Combo Balance-Charge Cord.

For EZ, No-Hassle Balance-Charging of 3S and 4S Lithium Batteries we recommend
our  EDN-CC-XH6S-3S Combo Balance-Charge Cord
and our EDN-CC-XH6S-4S Combo Balance-Charge Cord

Special Features

Optimized Operating Software
The RDX1 Pro's  “auto” feature sets the charge and discharge current for you automatically,
preventing overcharging which can damage your battery. In the event
of an error, the RDX1 Pro instantly disconnects the circuit and sounds an alarm.
This feature can be set by the user and controlled through the two-way link for
maximum safety.

Program Select
This charger can store up to 10 different charge/discharge profiles for your
convenience. You can keep the data pertaining to program settings of the battery
for continuous charging or discharging. Users can call out this data at any
time without setting any additional programming.

Internal Independent Lithium Battery Balancer
The RDX1 Pro features a built-in cell voltage balancer with uprated 300mA balancer so you don’t need to fuss withexternal balancers while charging.

Balancing Individual Cells During Discharging
When used with a balancing board the RDX1 Pro can monitor and balance each
cell in the pack individually while discharging. If the voltage of any single cell
is abnormal, the RDX1 will display an error message and the process will end
automatically.

Adaptable to Various Types of Lithium Batteries
The RDX1 Pro will charge and discharge a variety of Lithium batteries such as Li-ion,
LiPo, LiFe and the new higher voltage LiPo, (LiHV) batteries.

Multiple Lithium Battery Charge Modes
The RDX1 Pro features four methods of charging: Regular charge, Fast charge, Balance charge and Storage charge modes. We highly recommend using balance
charge as it is the safest and best way to charge lithium chemistry batteries. If
you plan on not using your Lithium chemistry batteries for an extended period
of time, Storage charge mode is recommended to optimize your packs for long
term storage and maximum lifespan.

Input Power Monitoring
The RDX1 Pro’s input voltage is monitored to protect the battery from becoming
damaged. The process ends automatically if it drops below the limit.

Capacity and Temperature Limits
The charge process will terminate if either the charging capacity or battery
temperature exceeds the limit set by the user. The temperature function
requires an optional temperature probe, (not included).

Processing Time Limit
Protect your battery by setting a maximum time limit for charging and
discharging.

Cyclic Charging/Discharging
A battery can be cycled 1 to 5 times consecutively. This process is good for
refreshing and balancing your battery.

Maximum Safety
Its delta-peak voltage detection program ends the charge cycle whenever a
battery’s voltage exceeds the set threshold.

Automatic Charging Current Limit
Charging current can be set by the user when charging Lithium, NiCd or NiMH
batteries. The ‘AUTO’ charging mode, however, is recommended when charging
NiMH batteries with low impedance and capacity.

LiPo Battery Meter
The user can check the battery’s total voltage, the highest and lowest as well as
each cells voltage.

PC Control Using Charge Master Software
The free Charge Master software (downladeable) gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the operation. Additionally, you have the ability to set up the
charger and update the firmware.